Double Arm Mixers

Double Arm Mixers - Czech & Slovakia

Used Nagema type DMK200/02 sigma blade double arm mixer for 200 litre

Used Nagema type DMK200/02 sigma blade double arm mixer for 200 litre

Stock #HG62317

Litlle used stainles steel 200 litre (44 gallon) capacity sigma blade double arm mixer with jacket, made by Nagema (Germany) type DMK200 / 02. Stainless steel vessel inside measures 850mm long X 680mm wide X 530mm deep. Stainles steel blades are driven through gear box by EL. Motor 3PH/400V/50HZ/11kW. Tilt type of discharge. Control panel is not included.

Location: cz

Add to Cart View Details

25 Litre Orlicke strojirny Model MV6 Stainless Steel Sigma Blade Double Arm Mixer

25 Litre Orlicke strojirny Model MV6 Stainless Steel Sigma Blade Double Arm Mixer

Stock #H4262-2

Used stainless steel 25 litre (6,6 gallon) working capacity (35 ltr total) stainless steel sigma blade double arm mixer made by Orlicke strojirny (Czech republic) type MV6. Stainless steel claded blades driven through gear box by el. motor 3ph/380v/50hz/1,5kw, front blade rotates with 51 rpm and rear blade rotates with 28 rpm. Stainless steel vessel inside measures 360 mm long x 320 mm wide x 340 mm deep, unit has carbon steel a nonpressure jacket. Standard seal on shaft. Has manual tipping discharge. Shipping dimension:width 1200mm and 600 mm lenght, height 1500mm.

Location: Perry Czech Warehouse

Add to Cart View Details

45 Litre Carbon Steel Sigma Blade Double Arm Mixer

45 Litre Carbon Steel Sigma Blade Double Arm Mixer

Stock #H4184-2

Used carbon steel 45 litre (12 gallon) total capacity sigma blade double arm mixer. Stainless steel vessel inside measures 450mm long X 390mm wide X 380mm deep. Carbon steel blades are driven through gear box and belts with pulley by el. motor 3PH/400V/50HZ/2,2kW. Manual tilt type of discharge. Control panel is included. Transport dimension: 1300 X 800mm, high: 1500mm. Weight 380 kg.

Location: Perry Czech Warehouse

Add to Cart View Details

100 Litre Nagema Model DMK100 Carbon Steel Sigma Blade Double Arm Mixer

100 Litre Nagema Model DMK100 Carbon Steel Sigma Blade Double Arm Mixer

Stock #H3747

Used carbon steel 100 litre (26 gallon) capacity sigma blade double arm mixer made by Nagema (Germany) type DMK100. Stainless steel vessel inside measures 600mm long X 500mm wide X 400mm deep. Carbon steel blades are driven through gear box and belts with pulley by EL. motor 3PH/400V/50HZ/7,5kW. Tilt type of discharge. Control panel is included. Transport dimension: 2400 X 1150mm, high: 1600mm

Location: Perry Czech Warehouse

Add to Cart View Details

100 Litre Nagema Model DMK100 Carbon Steel Sigma Blade Double Arm Mixer

100 Litre Nagema Model DMK100 Carbon Steel Sigma Blade Double Arm Mixer

Stock #HG62386

Used carbon steel 100 litre (26 gallon) capacity sigma blade double arm mixer made by Nagema (Germany) type DMK100. Stainless steel vessel inside measures 600mm long X 500mm wide X 400mm deep. Carbon steel blades are driven through gear box and belts with pulley by EL. motor 3PH/400V/50HZ/7,5kW. Tilt type of discharge. Control panel is included. Transport dimension: 2400 X 1150mm, high: 1600mm

Location: CZ

Add to Cart View Details

215 Litre Winkworth Model 31Z SD SS Vac Stainless Steel Jacketed Vacuum Z-Blade Mixer

215 Litre Winkworth Model 31Z SD SS Vac Stainless Steel Jacketed Vacuum Z-Blade Mixer

Stock #H3993-3

Used Winkworth model 31Z SD SS VAC stainless steel vacuum double arm Z-blade mixer. Mixer has approx. 215 litre working capacity and 335 litre total capacity. Mixing trough is approx. 737 mm long x 787 mm wide x 657 mm deep. Has carbon steel jacket. Stainless steel Z-blades are driven by el. motor and gearbox. Has hydraulic tilt discharge, stainless steel lid.

Location: Perry Czech Warehouse

Add to Cart View Details

215 Litre Winkworth Model 31Z SD SS Vac Stainless Steel Vacuum Z-Blade Mixer

215 Litre Winkworth Model 31Z SD SS Vac Stainless Steel Vacuum Z-Blade Mixer

Stock #H3993-1

Used Winkworth model 31Z SD SS VAC stainless steel vacuum double arm Z-blade mixer. Mixer has approx. 215 litre working capacity and 335 litre total capacity. Mixing trough is approx. 737 mm long x 787 mm wide x 657 mm deep. Stainless steel Z-blades are driven by el. motor and gearbox. Has hydraulic tilt discharge, stainless steel lid.

Location: Perry Czech Warehouse

Add to Cart View Details

215 Litre Winkworth Model 31Z SD SS Vac Stainless Steel Vacuum Z-Blade Mixer

215 Litre Winkworth Model 31Z SD SS Vac Stainless Steel Vacuum Z-Blade Mixer

Stock #H3993-2

Used Winkworth model 31Z SD SS VAC stainless steel vacuum double arm Z-blade mixer. Mixer has approx. 215 litre working capacity and 335 litre total capacity. Mixing trough is approx. 737 mm long x 787 mm wide x 657 mm deep. Stainless steel Z-blades are driven by el. motor and gearbox. Has hydraulic tilt discharge, stainless steel lid.

Location: Perry Czech Warehouse

Add to Cart View Details

300 Litre WP Stainless Steel Sigma Blade Double Arm Mixer

300 Litre WP Stainless Steel Sigma Blade Double Arm Mixer

Stock #H3887

Used stainless steel 300 litre (79 gallon) capacity sigma blade double arm mixer made by WP (Germany). Stainless steel vessel inside measures 820mm long X 800mm wide X 700mm deep. Stainless steel blades are driven through gear box and belts with pulley by EL motor. Hydraulic tilt type of discharge. Control panel is not included.

Location: Perry Czech Warehouse

Add to Cart View Details

400 Litre Stainless Steel Sigma Blade Double Arm Mixtruder

400 Litre Stainless Steel Sigma Blade Double Arm Mixtruder

Stock #H4257-3

Used stainless steel 500 litre total capacity and max. 400 litre (105 gallon) working capacity sigma blade double arm mixer/mixtruder made by Prerovske strojirny (Czech republic) type 7183. Stainless steel blades driven through gear box by el. motor 3ph/380v/50hz/18,5kW. Stainless steel vessel inside measures 890mm long x 800mm width - 800mm deep and is equipped by manually operated stainless steel lid. Standard seal on shaft. Machine has discharge through bottom screw with diameter 200 mm, driven by gearbox and electric motor 4/7,5 kW, 725/1440 rpm/380 V, 50 hz. Control panel is not included. Transport dimension : 4,0m x 1,3m width - 1,6m high. Weight: 4500 Kg.

Location: Perry Czech Warehouse

Add to Cart View Details

400 Litre Stainless Steel Sigma Blade Double Arm Mixtruder

400 Litre Stainless Steel Sigma Blade Double Arm Mixtruder

Stock #H4257-4

Used stainless steel 500 litre total capacity and max. 400 litre (105 gallon) working capacity sigma blade double arm mixer/mixtruder made by Prerovske strojirny (Czech republic) type 7183. Stainless steel blades driven through gear box by el. motor 3ph/380v/50hz/18,5kW. Stainless steel vessel inside measures 890mm long x 800mm width - 800mm deep and is equipped by manually operated stainless steel lid. Standard seal on shaft. Machine has discharge through bottom screw with diameter 200 mm, driven by gearbox and electric motor 4/7,5 kW, 725/1440 rpm/380 V, 50 hz. Control panel is not included. Transport dimension : 4,0m x 1,3m width - 1,6m high. Weight: 4500 Kg.

Location: Perry Czech Warehouse

Add to Cart View Details

Double Arm Mixers - Europe

Refurbished Jacketed Z-blade Mixer By Nagema Model DMK250

Refurbished Jacketed Z-blade Mixer By Nagema Model DMK250

Stock #UG6370

Refurbished z-blade mixer by Nagema (DE) model DMK250. Mixing chamber has volume 250 l and contact surface designed in stainless steel. Mixing chamber is equipped with heating/cooling carbon steel jacket. Machine is driven by el motor with power about 7.5 kW. Mechanical tilt discharge. New control panel. Working condition.

Location: Poland

Add to Cart View Details

 190 Litre Winkworth Type ZX190-9 Stainless Steel Mixer / Extruder

190 Litre Winkworth Type ZX190-9 Stainless Steel Mixer / Extruder

Stock #L1545

Perry is offering a high quality used Winkworth model ZX190-9 stainless steel mixer / extruder. Winkworth is recognised as a leading UK manufacturer of mixing equipment. Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2018 Serial Number: S10013445 Capacity: 190 litre (product dependent) Type Of Blades: (2) stainless steel masticator blade shafts Motor: 11kw motor & gearboxes Also Includes: main electrical control panel - Separate ICS model i-Temp ci 90t 18 heating/cooling unit. - External jacket rated 3.5 bar design pressure at 250 deg.c. - Top mounted Coperion model P30-BV-150 vacuum sequencing receiver with rotary lock valve. This unit is ready to run. A video of this mixer is available below. https://youtu.be/PgySZYmGTg8 Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.

Location: Newton Aycliffe, UK

Add to Cart View Details

Used Stainless Steel Z-blade Mixer Apinox Model S800/CW Volume 780L

Used Stainless Steel Z-blade Mixer Apinox Model S800/CW Volume 780L

Stock #UG6368

Used stainless steel z-blade mixer by Apinox (IT) type S800/CW. Total volume of mixing chamber 780 l. Mixer is driven by el motor 45 kW, 1475 rpm, 400 V, 50 hz. Mixing chamber is equipped with heating-cooling jacket. Machine dimensions: L 350 cm x W 160 cm x H 250 cm x weight 7 tons.

Location: Poland

Add to Cart View Details

1.5 Litre Polish Stainless Steel Z Blade Mixer

1.5 Litre Polish Stainless Steel Z Blade Mixer

Stock #UG6231

New polish made stainless steel laboratory sigma blade mixer. Mixing trough has total capacity of 3,0 l and working capacity of 1,5 l. It is equipped with heating/cooling jacket and an electric heating system. Mixing trough internal pressure: atmospheric with possible minimal vacuum to remove fumes. Maximal working temperature of mixing product: 200 Celsius degrees. Contact parts designed in polished stainless steel 316 grade, remaining parts designed in stainless steel 304 grade. Mixing trough equipped with two sigma blade agitators driven through a gearbox with electric motor 1.1 kW, 400 V, 50 Hz. Working speed of agitators: between 23 and 33 RPM regulated with frequency converter. Material of sealings: PTFE. Mixer is mounted on countertop construction. Manual unloading, the mixing trough is fixed. There is a revision hole is mounted on the lid.

Location: POLAND

Add to Cart View Details

27 Litre Winkworth Type 16Z Stainless Steel Z Blade Mixer

27 Litre Winkworth Type 16Z Stainless Steel Z Blade Mixer

Stock #RG9674

Used Winkworth model 16Z SS jacketed stainless steel Z blade mixer. Mixing trough approximately 410mm X 410mm X 360mm deep. Approximately 27-36 litre working capacity and 54 litre total capacity. Carbon steel jacket rated for steam heating up to 50 psi. Z-blades driven by medium 4 kw 415 volt 3/50 motor via a gearbox.

Location: UK

Add to Cart View Details

60 L Working Volume Stainless Steel Z-Blade

60 L Working Volume Stainless Steel Z-Blade

Stock #U2374-2

Used stainless steel z-blade mixer with working volume about 60 l. Total volume of mixing chamber about 100 l. Mixing chamber has stainless steel lid. Machine has two sigma blades driven by el motor with power 3.5 kW, 1420 rpm, 380-440V, 50 hz. Manual tilt discharge. Machine has start/stop control panel. Mounted on stainless steel supporting base.

Location: Perry Poland Warehouse

Add to Cart View Details

100 Litre Battaggion Stainless Steel Mixtruder

100 Litre Battaggion Stainless Steel Mixtruder

Stock #RG1098

Used Battaggion approximately 100 litre total capacity 304 stainless steel jacketed mixtruder. Working capacity approximately 50 litre to 70 litre (product dependent). Has (2) stainless steel sigma type mixing blades driven by 9kw motor. Has twin screw discharge driven by 5.5kw motor. Unit has mild steel jacket using thermal oil rated 3 bar design pressure at 250 to 280 deg.c. Unit mounted on mild steel frame.

Location: Europe

Add to Cart View Details

200 L Working Volume Stainless Steel Z-Blade Mixer

200 L Working Volume Stainless Steel Z-Blade Mixer

Stock #UG6372

Used stainless steel z-blade mixer with a working capacity of approx. 200 l. Total volume of mixing chamber approx. 300 l. Mixing chamber has the dimensions: length 800 mm, width 700 mm, depth 550 mm and is equipped with stainless steel lid. Machine has two sigma blades driven by ele. motor. Unloading by tilting the chamber. Machine has control panel equipped with a frequency converter. The machine is mounted on a carbon steel frame.

Location: Poland

Add to Cart View Details

400 Litre Polish Made New Jacketed Stainless Steel Sigma Blade Double Arm Mixer

400 Litre Polish Made New Jacketed Stainless Steel Sigma Blade Double Arm Mixer

Stock #UG6106

New Polish made jacketed sigma blade double arm mixer. Working capacity 400 L, total capacity 600 L. Mixing chamber and mixing arms are designed in stainless steel in food industry grade. Each mixing arm is driven by an electric motor 7,5 kW through a gearbox with speed: I - 34 rpm, II - 20 rpm. Tilt type of discharge with electric motor 2,2 kW, tilting time 0,5 min. Working pressure of the jacket 4 bar, working temperature 95°C, water heated, capacity 12 L, heat transfer area 1,4 M2. Unit is equipped with manually operated stainless steel lid. Shipping dimensions: 2885 X 1425 X 2400 mm, 2300 kg.

Location: Poland

Add to Cart View Details

400 Litre Redoctober Type 3W-400-K Stainless Steel Sigma Blade Double Arm Mixer

400 Litre Redoctober Type 3W-400-K Stainless Steel Sigma Blade Double Arm Mixer

Stock #AG61918

Used stainless steel 400 litre (105 gallon) working capacity sigma blade double arm mixer made by Redoctober (Ukraine) type ЗШ-400-К. Unit has heating-cooling jacket 0.6 bar pressure. Working camera has atmospheric pressure. Working temperature 0-160*C. Unit equipped with two counter rotating stainless steel blades which are driven through the gear box and el.motor 380V/50HZ/30kW. Discharge with the help of the screw. Mixer measures 3310mm X 1630mm X 2265mm.

Location: Europe

Add to Cart View Details

450 Litre Vickers Model 43Z Stainless Steel Jacketed Z-Blade Mixer

450 Litre Vickers Model 43Z Stainless Steel Jacketed Z-Blade Mixer

Stock #RG7472

Used Vickers model 43Z stainless steel jacketed Z-blade mixer. 450 litre working capacity and 600 litre total capacity. Mixing trough 1092mm long X 960mm wide X 740mm deep. Has stainless steel water jacket for heating and cooling. Standard mixing blades driven by 15 kW gear motor. Stainless steel hinged lid. Has hydraulically operated tilt discharge. Unit will be fully serviced and test run prior to dispatch. Carbon steel parts will be cleaned and powder coated with colour to suit.

Location: UK

Add to Cart View Details

450 Litre Winkworth Model 43Z SS DD Stainless Steel Z-Blade Mixer, Refurbished

450 Litre Winkworth Model 43Z SS DD Stainless Steel Z-Blade Mixer, Refurbished

Stock #RG7584

Refurbished Winkworth model 43Z SS DD jacketed stainless steel Z-blade mixer. 450 litre working capacity and 600 litre total capacity. Jacketed mixing trough 1090mm long X 959mm wide X 737mm deep. Standard duty stainless steel Z-blades driven by 15 kW motor and gearbox. Has hydraulic tilt discharge. Unit will be fully serviced and test run prior to dispatch. Carbon steel jacket will be lagged and clad with stainless steel cladding. Carbon steel parts will be cleaned and powder coated with colour to suit.

Location: UK

Add to Cart View Details

750 Litre AC Willard Model 750L Stainless Steel Z-Blade Mixer, Refurbished

750 Litre AC Willard Model 750L Stainless Steel Z-Blade Mixer, Refurbished

Stock #RG7415

Refurbished AC Willard model 750L Z arm stainless steel Z-blade mixer. Approximately 750 litre (198 US gallon) capacity. Jacketed mixing trough approximately 900mm wide X 900mm long X 900mm deep. Has stainless steel Z-blades driven by 40 HP 415 volt 3/50 motor via Richardson model SD14 40/1 gearbox. Has vacuum lid and includes Nash model ABF 55 liquid ring vacuum pump driven by 3 kW motor. Has hydraulically driven tilt discharge. Last used on rubber adhesive. Unit has been cleaned, painted and test run.

Location: AU

Add to Cart View Details

750 Litre Guittard Model M 58 Carbon Steel 'Z' Sigma Blade Double Arm Mixer

750 Litre Guittard Model M 58 Carbon Steel 'Z' Sigma Blade Double Arm Mixer

Stock #VB0001-02

Used Guittard model M 58 carbon steel 'Z' sigma blade double arm mixer. Approx 750 litre working capacity and 1000 litre total volume. Trough measures approx 1250 mm (L) X 1115 mm (W) X 610/850 mm (H). Unit includes carbon steel jacket on trough and protection grate. Tilt discharge. Mounted in a frame. Has (2) 140mm diameter inspection windows. Driven by a 75HP, 1470rpm, 380V motor. External dimensions 3000 mm (L) x 2100 mm (W) x 2200 mm (H). Raised lid height 3300mm. No control panel.

Location: NEUVILLE EN FERRAIN - FRANCE

Add to Cart View Details

900 Litre Baker Perkins Mild Steel Z Blade Mixer

900 Litre Baker Perkins Mild Steel Z Blade Mixer

Stock #RG8771

Used Baker Perkins mild steel jacketed Z blade mixer. 900 litre working capacity. Mixing trough 1320mm long X 1070mm wide X 1100mm deep. Has single curve serrated sheredder/dispersion blades with screw tilt discharge. Driven by 17/15kW gear drive (suitable for taking up to 37kW gear drive). Overall size 3000mm X 1900mm X 2900mm closed height or 3400mm tall discharge height

Location: UK

Add to Cart View Details

1,600 Litre Baker Perkins Mild Steel Z Blade Mixer

1,600 Litre Baker Perkins Mild Steel Z Blade Mixer

Stock #RG8772

Used Baker Perkins mild steel jacketed Z blade mixer. 1600 litre working capacity. Mild steel mixing trough 1830mm long X 1370mm wide X 1070mm deep. Has twin single curve dispersion blades. Driven by 50kW motor with separate drive for mechanical screw tilt. Fitted with steam jacket. Overall size 4000mm long X 3000mm wide X 2600mm high when closed X 400mm high when open.

Location: UK

Add to Cart View Details


Double Arm Mixers - USA

150 Litre Mild Steel Guittard Z Blade Mixer Type M 54

150 Litre Mild Steel Guittard Z Blade Mixer Type M 54

Stock #B0087-03

Used Mild steel GUITTARD Z blade mixer type M 54 - N°2551-Total volume : 150 litre-Useful capacity : 100 litre-Double jacket-Electric motor-Emptying by hydraulic tilting of the vessel-Internal dimensions of the vessel : 570 x 560 x H 390/500 mm

Location: NEUVILLE EN FERRAIN - FRANCE

Add to Cart View Details