Stainless Steel Tanks in Europe 10,000-19,999 Litres

Stainless Steel Tanks in Europe 10,000-19,999 Litres - Czech & Slovakia

Stainless Steel Tanks in Europe 10,000-19,999 Litres - Europe

Unused 10,000 litre Stainless Steel Vertical Jacketed Storage Vessel, 2100mm Dia x 2750mm Straight Side

Unused 10,000 litre Stainless Steel Vertical Jacketed Storage Vessel, 2100mm Dia x 2750mm Straight Side

Stock #RG2083

Unused Stainless Steel ZKG Tanks with a useful capacity of 10,000 litres and a total capacity of 12,700 litres. Tank has an internal diameter of 2100mm and an outside diameter is 2300mm. The tank is approximately 2750 mm high and the total height is approximately 4500 mm with 340mm ground clearance. The vessel is rated 3bar internal pressure at -10/40 Deg C. The vessel has a stainless steel cooling jacket with 2 zones of 3.5m² and 4.9m². There is one cooling zone in the cone which is approximately 2m². The jacket is rated 4 bar at -10/40 Deg C. The material of construction is CrNi-Steel, Wst-Nr. 1.4307/1.4301, DIN En 10028-7.

Location: Europe

Add to Cart View Details

10000 L Vertical Stainless Steel Mixing Tank

10000 L Vertical Stainless Steel Mixing Tank

Stock #U2421-3

Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (PL) with a working volume 10000 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2100 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 4 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 18 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) carbon steel legs. New 2003. Last time used in chemical production.

Location: Perry Poland Warehouse

Add to Cart View Details

10,000 Litre Stainless Steel Mixing Vessel, 1700mm Dia x 3900mm Straight Side

10,000 Litre Stainless Steel Mixing Vessel, 1700mm Dia x 3900mm Straight Side

Stock #L1525-10

Used FIB Industriele Bedrijuen BV approximately 10,000 litre stainless steel vertical mixing vessel. Unit has welded dished top and bottom heads. Unit measures approximately 1,700mm diameter x 3,900mm straight side. Internal rated 3 bar/full vacuum design pressure at 135 deg.c. Unit includes top entry stainless steel 2-tier, 4-blade agitator with Jongia drive, 11kw 50/60hz motor through Siemens gearbox rated 14.16/1 ratio. Unit is mounted on stainless steel side supports.

Location: Newton Aycliffe, UK

Add to Cart View Details

10000 L Vertical Stainless Steel Mixing Tank

10000 L Vertical Stainless Steel Mixing Tank

Stock #U2421-5

Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (PL) with a working volume 10000 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2100 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 2.2 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 20 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) stainless steel legs. New 2003. Last time used in chemical production.

Location: Perry Poland Warehouse

Add to Cart View Details

10,000 Litre 316 Stainless Steel Storage Vessel, 2200mm Dia x 2750mm Straight Side

10,000 Litre 316 Stainless Steel Storage Vessel, 2200mm Dia x 2750mm Straight Side

Stock #L1455-01

Used Websters approximately 10,000 litre 316 stainless steel vertical vessel. Unit measures approximately 2,200mm diameter x 2,750mm straight side. Has welded dished top and bottom heads. Internal rated atmospheric design pressure at ambient temparature.

Location: Newton Aycliffe, UK

Add to Cart View Details

10,000 Litre Stainless Steel Vertical Mixing Vessel 2300mm Dia x 2560mm Straight Side

10,000 Litre Stainless Steel Vertical Mixing Vessel 2300mm Dia x 2560mm Straight Side

Stock #L1486-01

Used approximately 10,000 litre stainless steel mixing vessel. Unit measures approximately 2300mm diameter x 2560mm straight side. Top entry 2 tier 4 blade agitator direct driven by a 2.2 kw 1415 rpm 415 volt 3/50 motor. Has flat hinged top and welded dished bottom heads. Mounted on (4) legs.

Location: Perry England Warehouse

Add to Cart View Details

10,000 Litre Stainless Steel Vertical Mixing Vessel 2300mm Dia x 2560mm Straight Side

10,000 Litre Stainless Steel Vertical Mixing Vessel 2300mm Dia x 2560mm Straight Side

Stock #L1486-03

Used approximately 10,000 litre stainless steel mixing vessel. Unit measures approximately 2300mm diameter x 2560mm straight side. Top entry 2 tier 4 blade agitator direct driven by a 2.2 kw 1415 rpm 415 volt 3/50 motor. Has flat hinged top and welded dished bottom heads. Mounted on (4) legs.

Location: Perry England Warehouse

Add to Cart View Details

10,000 Litre Stainless Steel Vertical Mixing Vessel 2300mm Dia x 2560mm Straight Side

10,000 Litre Stainless Steel Vertical Mixing Vessel 2300mm Dia x 2560mm Straight Side

Stock #L1486-02

Used approximately 10,000 litre stainless steel mixing vessel. Unit measures approximately 2300mm diameter x 2560mm straight side. Top entry 2 tier 4 blade agitator direct driven by a 2.2 kw 1415 rpm 415 volt 3/50 motor. Has flat hinged top and welded dished bottom heads. Mounted on (4) legs.

Location: Perry England Warehouse

Add to Cart View Details

11,000 Litre Vertical Liquid Storage Tank, 2500mm Dia x 2460mm Straight Side

11,000 Litre Vertical Liquid Storage Tank, 2500mm Dia x 2460mm Straight Side

Stock #RG9208

Used approx 11,000 litre vertical GRP liquid storage tank with flat base & slight cone top. Vessel measures approx 2,5M O/diameter X 2,46M on straight side + 0,35M for top cone & breather box. Openings top: 1 X 460mm manway (no lid), 1 X breather box top center of cone, 2 X 50mm (on a 1,5M PCD) top side flanges: 1 X 50mm, 1 X 50mm blanked off. Bottom side flanges: 1 X 50mm 250mm up from base. Bottom discharge outlets: 2 X 50mm & 1 X 25mm. Unit has 2 X lifting / handling eyes (top straight side) & 4 X base fixing lugs.

Location: Perry England Warehouse

Add to Cart View Details

11,700 Litre 316 Stainless Steel Vertical Jacketed Tank, 2200mm Dia x 2700mm Straight Side

11,700 Litre 316 Stainless Steel Vertical Jacketed Tank, 2200mm Dia x 2700mm Straight Side

Stock #RG9205

Used 11,700 litre (approx total volume) stainless steel 316 vertical cylindrical jacketed (straight side only 2,2M deep) tank with welded dish top & bottom. Openings top: 3 X 50mm, 3 X 80mm, 2 X 100mm, 1 X 150mm, 1 X 300mm (top dead centre suitable for drive unit) & 1 X 450mm diameter manway with bolt on / off lid. Bottom outlets: 1 X 80mm (on centre line) & 1 X 80mm (offset from centre line) internal: vessel has four (4) 8mm thick X 220mm deep full length plate baffles. Vessel measures: 2,2M diameter (+ 70mm for stainless steel jacket) X 2,7M on straight side + 500mm for each dished end. Unit supported by full cylindrical carbon steel skirt incorporating two (2X) 200mm diameter access ports & base anchor ring at 2,33M O/DIA. Floor clearance from lower face of bottom outlet flange is approximately 600mm. Unit can also be supported by 2,47M diameter ring positioned 1,2mm below upper face of top centre flange. Top dish has 3X 140mm deep support ribs for drive unit + a bolt on / off carbon steel tubular safety cage at 1,3M high & 1X lifting / turning eye

Location: Perry England Warehouse

Add to Cart View Details

12,000 Litre Stainless Steel Vertical Storage Vessel, 1980mm Dia x 3570mm Straight Side

12,000 Litre Stainless Steel Vertical Storage Vessel, 1980mm Dia x 3570mm Straight Side

Stock #RG9534

Used approximately Moeschle Behalterbau GmbH 12,000 litres stainless steel 304 vertical storage vessel. Vessel diameter: 1980mm. Vessel length / depth on straight side: 3570mm. End configuration and depth: Fully welded top and bottom dishes 300mm DEEP. Supports: 4 off rectangular section welded stainless steel legs 190mm WIDE with screw feet. Approximately 400mm ground clearance. Connections and manways: TOP: 1 x 10mm flanged, 1 x 75mm RJT connections Side: 340mm x 440mm oval manway with hinged door and strap to lower side.1 x 32mm BSP socket to upper side. 1 x 38mm BSP socket to mid-side. 2 x 10mm flanged, 1 x 50mm IDF male, 1 x 18mm BSP socket, 2 x threaded probe sockets to lower side. Base: 1 x 50mm RJT male, 1 x 100mm internal overflow outlet, 1 x threaded probe connection. Operating pressure: Atmospheric. Other information: 2 off top lifting eyes. Serial number: 21542. Base and 2050mm of lower side have "double skin" of insulation / still air jacket. Not for heating / cooling.

Location: UK

Add to Cart View Details

12000 Liters Stainless Steel Vertical Tank

12000 Liters Stainless Steel Vertical Tank

Stock #UG47937

Unused 12000 liter stainless steel vertical tank made by Kralavopolska Strojna (Brno, Czech republic),type 2278. Flat top and bottom. 7kW/1450 rpm agitator. Dimensions: 1980 mm DIA. X 3820 mm height.

Location: ROMANIA

Add to Cart View Details

12500 L Vertical Stainless Steel Mixing Tank

12500 L Vertical Stainless Steel Mixing Tank

Stock #U2421-4

Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (PL) with a working volume 10000 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2100 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 4 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 18 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) carbon steel legs. New 2003. Last time used in chemical production.

Location: Perry Poland Warehouse

Add to Cart View Details

12500 L Vertical Stainless Steel Mixing Tank

12500 L Vertical Stainless Steel Mixing Tank

Stock #U2421-6

Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (PL) with a working volume 10000 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2100 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 2.2 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 20 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) stainless steel legs. New 2003. Last time used in chemical production.

Location: Perry Poland Warehouse

Add to Cart View Details

12500 L Vertical Stainless Steel Mixing Tank

12500 L Vertical Stainless Steel Mixing Tank

Stock #U2421-1

Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (PL) with a working volume 12500 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2550 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 4 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 18 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) legs carbon steel legs. New 2003. Last time used in chemical production.

Location: Perry Poland Warehouse

Add to Cart View Details

12500 L Vertical Stainless Steel Mixing Tank

12500 L Vertical Stainless Steel Mixing Tank

Stock #U2421-2

Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (PL) with a working volume 12500 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2550 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 4 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 18 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) legs carbon steel legs. New 2003. Last time used in chemical production.

Location: Perry Poland Warehouse

Add to Cart View Details

13,450 Litre Stainless Steel Vertical Storage Vessel, 2600mm Dia x 2000mm Straight Side

13,450 Litre Stainless Steel Vertical Storage Vessel, 2600mm Dia x 2000mm Straight Side

Stock #L0919

Used approximately 13,450 litre (82 UK barrel) vertical stainless steel storage vessel. Unit measures approximately 2600mm diameter X 2000mm straight side. Unit has welded dished top and bottom heads. Internal rated 2.76 bar working pressure. Mounted on (8) carbon steel legs. Unit is currently lagged and clad.

Location: Perry England Warehouse

Add to Cart View Details

19670 Litre 304 Stainless Steel Vertical Mixing Tank, 2200mm Dia x 5013mm Straight Side

19670 Litre 304 Stainless Steel Vertical Mixing Tank, 2200mm Dia x 5013mm Straight Side

Stock #L1368-11

Used Pontifex 19670 litre 304 stainless steel vertical mixing tank. Unit measures 2200mm diameter x 5013mm straight side. Top entry 2 tier 3 blade pitched paddle type agitator driven by a 0.75kw 690rpm 3/50 motor via a gearbox. Has welded flat top and conical bottom heads. Internal rated atmosperic pressure at 100 degc. Also includes internal coil rated 8 bar design pressure at 180 degc.

Location: Perry England Warehouse

Add to Cart View Details


Stainless Steel Tanks in Europe 10,000-19,999 Litres - USA

15000 Litres Isothermal 316 Stainless Steel Horizontal Jacketed Tank

15000 Litres Isothermal 316 Stainless Steel Horizontal Jacketed Tank

Stock #ZS63469

Used Bio-Inox 15,000 litres isothermal 316 stainless steel horizontal tank. Dimensions: 2 400 mm diameter x length 5000 mm, weight 2460 kg. Maximum height 3100 mm. Has 3 interior divixions. Has 3 manways on top. Mounted on stainless steel support frame with legs.

Location: EUROPE

Add to Cart View Details

15000 Litres Isothermal Stainless Steel Horizontal Tank

15000 Litres Isothermal Stainless Steel Horizontal Tank

Stock #ZS63468

Used 15,000 litres isothermal stainless steel horizontal tank. Dimensions: 2 100 mm diameter x length 4450 mm, weight 1280 kg. Maximum height 3100 mm. Has manway on top. Mounted on stainless steel support frame with short legs.

Location: EURO

Add to Cart View Details